MODERN REQUIREMENTS FOR FORMATIVE FACTORS OF THREE-DIMENSIONAL SPATIAL ORGANIZATION OF MID-RISE RESIDENTIAL BUILDINGS WITH ENERGY-SAVING TECHNOLOGIES (4-7)

Архив в PDF формате
Дата публикации статьи в журнале: 2020/01/08
Название журнала: Восточно Европейский Научный Журнал, Выпуск: 52, Том: 5, Страницы в выпуске: 4-7
Автор: Moradi Pour Omid
Kiev, Kiev National University of Construction and Architecture ,
Анотация: The requirements for formative factors of three-dimensional spatial organization of a building with energy-saving technologies are formulated. A mathematical model for monitoring the parameters of heating, ventilation and air conditioning system based on the temperature and humidity level is proposed. An algorithm for cooling, heating and controlling the level of humidity in the building, which is based on the ideal Carnot cycle, has been developed. It is shown that the calculation of the energy-saving system of heating, ventilation and air conditioning system should be based on the calculation of the maximum efficiency factor taking into account the consideration of all sources of heat and moisture in the premise. Determining the maximum of the objective function can be used to determine the optimal operating mode of heating, ventilation and air conditioning at the mathematical level
Ключевые слова: energy-saving technologies   residential building   heating   ventilation   air conditioning   humidity level   Carnot cycle   Carnot cycle  
Данные для цитирования: Moradi Pour Omid , . MODERN REQUIREMENTS FOR FORMATIVE FACTORS OF THREE-DIMENSIONAL SPATIAL ORGANIZATION OF MID-RISE RESIDENTIAL BUILDINGS WITH ENERGY-SAVING TECHNOLOGIES (4-7). Восточно Европейский Научный Журнал. Архитектура. 2020/01/08; 52(5):4-7.

Список литературы: 1. Abramski, M., Friedrich, T., Kurz, W., & Schnell, J. (2011). Innovative Shear Connectors for a New Prestressed Composite Slab System for Buildings with Multiple HVACR Installations. Composite Construction in Steel and Concrete VI. doi: 10.1061/41142(396)9. 2. Hernandez, A. (2012). HVAC & Building Management Control System Energy Efficiency Replacements. doi: 10.2172/1063877. 3. Wright, J., & Zhang, Y. (2008). Evolutionary Synthesis of HVAC System Configurations: Experimental Results. HVAC&R Research, 14(1), 57– 72. doi: 10.1080/10789669.2008.10390993. 4. Muthuraman, S. (2016). Careers in HVACR: heating, ventilation, air conditioning, refrigeration. Chicago: Institute for Career Research. 5. Varghese, A. C., & Palmer, G. (2016). Chapter 23 Clean room technology for low resource IVF units. Clean Room Technology in ART Clinics, 345–352. doi: 10.1201/9781315372464-24. 6. Domb, M. (2019). Smart Home Systems Based on Internet of Things. IoT and Smart Home Automation [Working Title]. doi: 10.5772/intechopen.84894. 7. Balasubramanian, K., & Cellatoglu, A. (2010). Selected Home Automation and Home Security Realizations: An Improved Architecture. Smart Home Systems. doi: 10.5772/8408. 8. Saito, N. (2015). The concept of an ecological smart home network. Ecological Design of Smart Home Networks, 3–16. doi: 10.1016/b978-1-78242-1191.00001-1. Wschodnioeuropejskie Czasopismo Naukowe (East European Scientific Journal) #12 (52), 201 7 9. Abad, J. M. N., & Soleimani, A. (2016). A neuro-fuzzy fan speed controller for dynamic management of processor fan power consumption. 2016 1st Conference on Swarm Intelligence and Evolutionary Computation (CSIEC). doi: 10.1109/csiec.2016.7482121. 10. Liu, X., Jiang, Y., & Zhang, T. (2016). Temperature and Humidity Independent Control (Thic) of Air-conditioning System. Berlin: Springer Berlin. 11. Bruno, F. (2010). Testing of an Evaporative Cooling System That Supplies Air Near the Dew Point Temperature. Proceedings of the EuroSun 2010 Conference. doi: 10.18086/eurosun.2010.10.09. 12. Dean, J., Kozubal, E., Herman, L., Clark, S., Heaton, T., Eastment, M., Galvin, J. (2013). Dew Point Evaporative Comfort Cooling. doi: 10.21236/ada600308. 13. Dean, J., Herrmann, L., Kozubal, E., Geiger, J., Eastment, M., & Slayzak, S. (2012). Dew Point Evaporative Comfort Cooling: Report and Summary Report. doi: 10.2172/1060597. 14. Kareem, B. (2018). Experimental and Theoretical Study of Dew Point Evaporative Cooling System Suitable for Erbil Climate. Polytechnic Journal, 8(2), 102–118. doi: 10.25156/ptj.2018.8.2.205. 15. Qi, H. B., He, F. Y., Wang, Q. S., Li, D., & Lin, L. (2012). Simulation Analysis of Heat Transfer on Low Temperature Hot-Water Radiant Floor Heating and Electrical Radiant Floor Heating. Applied Mechanics and Materials, 204-208, 4234–4238. doi: 10.4028/www.scientific.net/amm.204-208.4234. 16. Ahn, B.-C. (2011). Radiant Floor Heating System. Developments in Heat Transfer. doi: 10.5772/22409. 17. Budiaková, M. (2016). Indoor Environment Influenced by Radiant Effect of Floor Heating. Applied Mechanics and Materials, 824, 218–225. doi: 10.4028/www.scientific.net/amm.824.218. 18. Kerndl, M., & Steffan, P. (2017). Intelligent radiant floor heating regulation system with wireless sensors. 2017 40th International Conference on Telecommunications and Signal Processing (TSP). doi: 10.1109/tsp.2017.8075936. 19. Klubal, T., & Ostrý, M. (2014). Integration of PCMs and Capillary Radiant Cooling/Heating to Ensure of Thermal Comfort. Advanced Materials Research, 1041, 350–353. doi: 10.4028/www.scientific.net/amr.1041.350. 20. Liu, X., Shi, L., & Li, Y. (2017). Simulation study on capillary asymmetric radiant heating system. Procedia Engineering, 205, 2215–2222. doi: 10.1016/j.proeng.2017.10.051. 21. Kosonen, R. (2017). Chilled Beams and Radiant Ceiling Systems. Air Conditioning System Design, 151–166. doi: 10.1016/b978-0-08-1011232.00008-x. 22. Koca, A., & Çetin, G. (2017). Experimental investigation on the heat transfer coefficients of radiant heating systems: Wall, ceiling and wall-ceiling integration. Energy and Buildings, 148, 311–326. doi: 10.1016/j.enbuild.2017.05.027. 23. Zhang, C., Heiselberg, P. K., Chen, Q., & Pomianowski, M. (2016). Numerical analysis of diffuse ceiling ventilation and its integration with a radiant ceiling system. Building Simulation, 10(2), 203–218. doi: 10.1007/s12273-016-0318-z 24. Koca, A., & Çetin, G. (2017). Experimental investigation on the heat transfer coefficients of radiant heating systems: Wall, ceiling and wall-ceiling integration. Energy and Buildings, 148, 311–326. doi: 10.1016/j.enbuild.2017.05.027. 25. Simic, D., Kral, C., & Pirker, F. (2005). Simulation of the cooling circuit with an electrically operated water pump. 2005 IEEE Vehicle Power and Propulsion Conference. doi: 10.1109/vppc.2005.1554567.