Архив в PDF формате
Дата публикации статьи в журнале: 2020/01/08
Название журнала: Восточно Европейский Научный Журнал, Выпуск:
52, Том: 2,
Страницы в выпуске: 70-73
Автор: Gomelya Nikolai Dmitrievich
, National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute” , Doctor of technical sciences
, National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute” , Doctor of technical sciences
Автор: Linyucheva Olga Vladimirovna
, National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute” , Doctor of technical sciences
, National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute” , Doctor of technical sciences
Автор: Ushchapovskiy Dmitriy Yurievich
, National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute” , PhD
, National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute” , PhD
Анотация: The process of contact copper plating electrolyte regeneration using ion-exchange membranes is studied. The high efficiency of the process and the possibility of organizing a closed cycle are shown. The calculation of the energy consumption of the method was made. It is shown that the energy consumption for the regeneration of the etching solution is 400 kW·h/m3 (20 Euro/m3) and for the regeneration of the copper plating solution is 600 kW·h/m3 (20 Euro/m3). The applicability of the proposed method for the wastewater recovery process after the contact copper plating process is also shown
Ключевые слова:
contact copper plating
filler wire
copper concentration
ion-exchange membrane
membrane electrolysis
Данные для цитирования:
Gomelya Nikolai Dmitrievich ,
Linyucheva Olga Vladimirovna ,
Ushchapovskiy Dmitriy Yurievich .
METHOD OF ELECTROCHEMICAL RECOVERY OF WASTE WATER AND ELECTROLESS COPPER PLATING ELECTROLYTE (70-73). Восточно Европейский Научный Журнал. Химические науки. 2020/01/08;
52(2):70-73.